Skip to main content
Cost & estimates

How much does a fence cost in New Jersey?

Real per-foot pricing for vinyl, wood, aluminum and chain link based on actual installs in Wayne and surrounding towns. Run the calculator below for an instant range — no commitment, no sales pressure.

Try the calculator Call (973) 259-5354
  • Vinyl $35–$60 per ft installed
  • Wood $25–$50 per ft installed
  • Aluminum $32–$50 per ft installed
  • Chain link $15–$30 per ft installed

Instant estimate

Fence cost calculator

Tell us about the project and we'll show a realistic installed-cost range in seconds. Submit your contact info at the bottom and we'll follow up with a free on-site visit and a written quote — usually within 24 business hours.

Material
Fence length 120 ft
20 ft 500 ft
Fence height
Gates 1

Each gate adds $200-$900 depending on size and material.

Terrain

What drives the number

6 factors that decide your fence cost

Two homes on the same street can pay 40% different prices for the same fence. Here's why.

Total fence length

The biggest single driver. Most NJ residential jobs run 80-250 ft of perimeter — measure all sides you want enclosed.

Material choice

Chain link is cheapest per foot; vinyl, wood, and aluminum sit in a similar mid-range. Cedar wood and premium vinyl push higher.

Terrain difficulty

Sloped or rocky NJ lots add 10-25% labor. Hidden roots and underground utilities can also add time.

Gates

Each gate adds $200-$900 depending on size, material, and hardware (single vs double, with locks, etc.).

Fence height

A 6-ft fence is the privacy baseline. 4-ft saves about 15% of material; 8-ft adds 30% (and may need permits).

Permits & code

Wayne and most NJ towns require fence permits. We handle them; the fee typically runs $50-$200 depending on town.

Side by side

Material comparison

Installed costs and lifespan for the four materials we install most in northern New Jersey.

Material Cost / ft installed Lifespan Maintenance Best for
Chain link $15–$30 15–20 yrs Minimal Pets, security, budget projects
Wood $25–$50 15–20 yrs Stain every 2-3 yrs Classic look, customization
Aluminum $32–$50 25+ yrs Almost none Pool code, ornamental front yards
Vinyl $35–$60 25–30+ yrs Wash occasionally Privacy, low-maintenance owners

What's in the number

What you're paying for (vs. doing it yourself)

Included with a pro install

  • Permit pulled with your town hall
  • Markout for underground utilities (free, required)
  • Professional removal & disposal of old fence
  • Posts set in concrete to NJ frost depth
  • Manufacturer warranty on materials
  • 1-year workmanship warranty on labor

Common DIY pitfalls in NJ

  • No utility markout = damaged lines = personal liability
  • Frost-shallow posts heave in NJ winters
  • Code-violating heights mean tear-downs
  • Rented digger doesn't break NJ bedrock — rentals add up
  • No supplier discount: retail material costs 20-40% more
  • A failed corner re-do typically costs more than hiring out

Ready for a real number?

Run the calculator above for an instant range, or talk to a fence pro about your specific site — we'll come out, measure, and write a line-item quote on the spot.

Run the calculator Book a site visit
(973) 259-5354

Questions, answered

Fence cost FAQ

How accurate is the cost calculator?
The calculator gives a realistic range based on real Wayne, NJ installation jobs. Final pricing depends on site visit factors we can't see online — corner counts, gate locations, soil conditions, and the exact material grade you pick. Expect the final quote to land inside the range we show, occasionally above for premium materials or hard terrain.
Why are some materials so much more expensive?
Chain link uses thin galvanized wire and posts — fast to install. Vinyl, wood, and aluminum use heavier panels, more posts per linear foot, more concrete, and longer install time. Within a material, premium tiers (cedar wood, double-walled vinyl, ornamental aluminum) carry a 30-50% premium over standard grades.
Are permits included in the estimate?
Yes. We pull the permit with your town and the fee is rolled into our quote — typically $50-$200 depending on the municipality. NJ requires permits on most residential fences over 4 ft, and many towns require them at any height.
Do you finance installations?
Yes. We offer 0% APR promotional financing through Synchrony. See our financing page for plan examples and the soft-credit application — no impact on your score to check eligibility.
How long does installation take?
A typical 150-200 ft residential fence is installed in 1-3 days. Demolition of an old fence adds half a day. Sloped or rocky terrain may add a day. We schedule a firm start date once permits are in hand.
What's the minimum project size?
We take projects of any size including small repairs, but our minimum for a full install with delivery, crew, and equipment is typically around $1,500. Smaller jobs are usually quoted as a flat trip charge plus material.
Can I get a written quote from this calculator?
The calculator gives an instant range. When you submit your name, email, and project ZIP, we follow up with a free on-site visit and a written line-item quote — usually within 24 business hours.
Do you only install fences, or do repairs too?
Both. We do full installs (residential and commercial) and emergency fence repair. If your fence is partially damaged, we can match material and rebuild a section rather than redo the whole run.